IRISPASS®-M



The eye becomes the key to security

No two human irises are alike, not even those of your own left and right eye. The iris is the contractile membrane of the pupil and its random patterns are unique to each individual. Iris recognition technology identifies people by their unique iris patterns. This is what makes iris recognition the most accurate form of biometric measurement.

The OKI® IRISPASS® provides the highest levels of protection by controlling access to high-security areas via the most precise iris recognition technology available. OKI technology is easy-to-use, fast and accurate, precisely verifying individuals.


Feature

1. Intuitive user interface
As simple as having your snapshot taken; no camera adjustments by manual.
100% non-touch operation.
2. Rapid throughput
Image acquisition starts when the blue light flashes.
Identification is complete in less than 1 second after image acquisition.
Throughput rates of over 10 persons per minute can be supported.
3. Voice guidance
Pre-recorded messages guide users into proper position in conjunction with visual indicators.
Messages can be customized in any language for international use.
4. Compliance with international standards
The application interface complies with ANSI INCITS 358-2002 (known as BioAPITM v1.1) and iris image complies with ISO/IEC 19794-6.

Spesification


Image Capture Speed : 1 second or less
(Image capture speed may very depending on conditions.)

Iris Identification Speed : 1 second or less
(At proper PC configuration and depending on database size.)

FAR
(False Acceptance Rate) : 1 in 1.2 million

Operational Range : Distance: 30-60cm (1-2 feet)
User's height: 145-200cm (57-78 inch)

Size (mm) : 328 W x 197 H x 84 D
(12.92 W x 7.76 H x 3.31 D inch)

Weight : 5kg (11 lbs.)

Power Supply : AC100-240V, 50/60Hz (AC adaptor)

Operating Environment : Temperature: 0-40ºC
Humidity: 30-80% (@30ºC)
Indoor

Networking : LAN Connectivity: 100BASE-T Ethernet

Software : BioAPITM v1.1
PrivateID® v2.3

Controller PC
Requirements CPU: Celeron® 2GHz,or faster
RAM: 512MB minimum
OS: Windows® XP,Windows® 2000

Networking LAN Connectivity: 100BASE-T Ethernet

Software BioAPITM v1.1
PrivateID® v2.3

Controller PC
Requirements CPU: Celeron® 2GHz,or faster
RAM: 512MB minimum
OS: Windows® XP,Windows® 2000


Read more!
 

IRIS SCANNER


Introduction
The Iris recognition is based on visible (via regular and/or infrared light) qualities of the iris. A primary visible characteristic is the trabecular meshwork (permanently formed by the 8th month of gestation), a tissue which gives the appearance of dividing the iris in a radial fashion. Other visible characteristics include rings, furrows, freckles, and the corona, to cite only the more familiar.

Iris-Scan Applications
Iris-scan technology has traditionally been deployed in high-security employee-facing physical access implementations, although 2002 saw a number of novel, high-profile iris-scan deployments in new applications. Iridian - the technology's primary developer - is dedicated to moving the technology to the desktop, and has had some success in small-scale logical access deployments. The most prominent recent deployments of iris-scan technology have been passenger authentication programs at airports in the U.S., U.K., Amsterdam, and Iceland; the technology is also used in corrections applications in the U.S. to identify inmates. A number of developing countries are considering iris-scan technology for national ID and other large-scale 1:N applications, although to date it is still believed that the largest deployed Iridian database spans under 100,000 enrollees. Notable iris-scan applications include the following.
Project Description Location Vertical Sector Horizontal Application Application Description Additional Description
Iris in Pakistan Pakistan Government Civil ID Tracking Afghan refugees receive assistance package on first enrollment through UNHCR
Iris Pilot - Logan US-MA Travel and Transportation Phys Acc/T&A Physical Access Iris piloted for employee access to security office (LG3000)
JFK Iris Pilot US-NY Travel and Transportation Phys Acc/T&A Physical Access 1 door to tarmac protected
City Hospital of Bad Reichenhall in Bavaria Germany Health care Phys Acc/T&A Physical Access Access control to infant center to prevent kidnappings
Singapore Border Crossing Singapore Government Travel and Transportation Physical Access 50k day workers enter Singapore from Malaysia daily by motorcycle. Iris-scan does 1:N
UK Passport Office Iris Pilot UK Government Civil ID Passport Opt-in pilot to test iris acceptance, part of 6-mo public comment period
Venerable Bede (UK) School - Iris UK Education Retail/ATM/POS POS 900-pupil school to use Iridian for library check-out and cafeteria payment


Read more!
 

IrisAccess™3000 - Identification Control Unit - Iris Scanner



The ICU3000 is always installed on the wall inside the protected or controlled area. Unlike many other biometric devices including some other iris recognition cameras, no biometric templates are stored on the optical unit. Iris images input via the ROU3000 reach the securely located ICU3000 which creates 512-byte templates from ROU input to compare these with stored values. If a match is found, the unit generates a signal to directly open a door, or provides Weigand output to signal a panel that then controls access. An ICU 3000 with one Frame Grabber Board (FGB) and one Door Interface Board (DIB) controls two doors. Inserting another FGB and DIB increases the number of ROUs/doors an ICU3000 can control to four.


Spesification
Dimensions (W x H x D): 16.9" x 16.5" x 6.4" (430mm x 420mm x 163mm)
Weight: 25.4 lbs. (11.5kg)
Power Input: 100~240VAC, 60/50Hz
Power Consumption: 25W
CPU: More than Pentium® III-633Mhz
Memory: 128Mb SDRAM
Storage: 1 Hard Drive 20Gb
Camera Control: RS-422 (Standard: 2 channel, Max: 4 channel)
Video Input: Composite 1 Vp-p 75 BNC Connection (Standard: 2 channel, Max: 4 channel)
Capture Capability: 15 fps for each ROU3000
Interface (per channel): Door control dry contact relay, Wiegand input and output, RS-422 serial, 4 General Input (Egress, Alarm, Door Status, Lock Status), 1 General Output.
Operating System: LINUX
LED Indication: Power(red)
Operating Temperature: 32°F - 104°F (0°C - 40°C)
Storage Temperature: -4°F - 140°F (-20°C - 60° )
Humidity: 0% to 95% Non-condensing
Required LAN Cable: CAT5 8-Pin RJ45 Cable 328'(100m) Max.
Power: Direct wire as required by local codes


Read more!
 

IrisAccess™3000 - Remote Optical Unit - Iris Scanner



The ROU3000 remote optical unit is installed adjacent to the door being controlled. The ROU3000 remote optical unit is composed of 2 parts, the optical imager with the front enclosure and the rear enclosure. After the rear enclosure is mounted on or recessed into the wall adjacent to the controlled portal, the optical imager with the front enclosure is mounted within the rear enclosure. ROU3000 contains the elements for iris image acquisition. ROU3000 provides voice message and light indication whether the user is recognized or not.


Specification

* Dimensions: 175(W) x 253(H) x 132(D) mm
* Weight: 3.4kg
* Power Input: 100-200 VAC, 60/50 Hz
* Power Consumption: 17W
* Signal system: NTSC
* Video Output: Composite Output: 1 Vpp 75 O
* Internal Component:
* : Modified x 16 Zoom B/W CCD Camera 2 IR LED and etc.
* Camera Control: RS 232C
* LED indication: Power(Blue) / Active(Green Blink) / Accept(Green) / Reject(Red) / Voice Down(Red Blink)
* Voice Indication: Flexible Voice Message
* English: Standard
* Other Language: Downloading Available
* Operating Range: 3-10" (8-25cm)
* Operating Temp.: Degree 0 -40 (Celsious)
* Storage Temp.: Degree -20-60 (Celsious)
* Humidity: 0% to 95% Non-Condensing
* Rotation Angle: Degree +26 / -18


WebManufacture : LG Iris


Read more!
 

IrisAccess™3000 - Enrolment Unit -Iris Scanner



The EOU3000 enrolment unit is placed on a desk or table adjacent to the Server PC. EOU3000 contains all the elements necessary to initiate the enrolment process, illuminate the iris and acquire an iris image. The EOU3000 unit provides voice message and light indication upon the completion of iris registration.

Specification

* Dimensions: 182(W) x 335(H) x 203(D)mm
* Weight: 3.64Kg
* Power Input: 100-240 VAC, 60/50 Hz
* Power Consumption: 17W
* Signal system: NTSC
* Video Output: Composite Output: 1Vpp 75O
* Internal Component: Modified x 16 Zoom B/W CCD Camera 2 IR LED and etc.
* Camera Control: RS 232C
* LED indication: Power(Blue) / Active(Green Blink) / Accept(Green) / Reject(Red) / Voice Down(Red Blink)
* Voice Indication: Flexible Voice Message
* English: Standard
* Other Language: Downloading Available
* Operating Range: 3-10" (8-25cm)
* Operating Temp.: Degree 0 -40 (Celsius)
* Storage Temp.: Degree -20-60 (Celsius)
* Humidity: 0% to 95% Non-Condensing
* Rotation Angle: Degree +41 / -0

WebManufacture : LG Iris


Read more!

This page is powered by Blogger. Isn't yours?

Technology Blog Top Sites